Glass sandblasting in Dubai typically costs between AED 35 and AED 150 per square foot in 2026, depending on glass thickness, design complexity, and whether you choose supply-only or supply-and-installation.
Simple frosted panels in standard thicknesses sit at the lower end of the range, while toughened glass with custom logos or intricate artwork reaches the higher end.
If you are budgeting for a partition, shower enclosure, office door, or decorative panel, this guide breaks down the real glass sandblasting cost in Dubai, with prices by glass type, by application, and by project size, so you can plan accurately and compare quotes with confidence.
How Much Does Glass Sandblasting Cost in Dubai?
There is no single fixed rate, because every project differs in size, thickness, and design. The table below gives indicative 2026 planning estimates for the Dubai and wider UAE market. Always request a project-specific quote before finalising your budget.
| Service | Indicative Cost (per sq ft) | Notes |
| Standard sandblasted glass (3-6 mm clear, simple/full frost) | AED 35-70 | Supply only; most common for partitions and doors |
| Toughened sandblasted glass (8-12 mm) | AED 70-150 | Supply only; required for showers, frameless setups |
| Custom design, logo or artwork sandblasting | AED 60-180+ | Often quoted per project based on detail |
| Sandblasting service on client-supplied glass | AED 12-30 | Process only, glass not included |
| Installation (add-on) | AED 15-45 | Depends on access, height and fittings |
In per-square-metre terms, standard sandblasted glass works out to roughly AED 375-750 per sq m, and toughened sandblasted glass to roughly AED 750-1,600 per sq m.
Most suppliers also apply a minimum order value, commonly AED 250-500, so very small jobs cost more per square foot than large ones.
What Affects the Cost of Glass Sandblasting in Dubai?
Several factors move the final figure up or down. Understanding them helps you read a quote correctly and avoid overpaying.
- Glass thickness. Thicker glass (10 mm, 12 mm) costs significantly more than 4 mm or 6 mm, both in raw material and in processing time.
- Glass type. Clear float glass is the most affordable base. Tinted, toughened (tempered), and laminated glass each add to the cost, with toughened glass being essential for shower enclosures and frameless installations.
- Design complexity. A uniform full frost is the cheapest finish. Custom patterns, gradients, branded logos, and detailed artwork require stencilling and skilled handwork, raising the price.
- Panel size and quantity. Larger panels and bigger orders lower the cost per square foot, while small one-off pieces carry a minimum charge.
- Single-side vs double-side sandblasting. Etching both faces of the glass roughly increases the processing cost.
- Edge work and machining. Polished edges, bevelling, cut-outs, drilled holes, and notches are charged separately.
- Installation. Supply-and-fit projects include labour, fittings, transport, and site access, so high-rise or complex fit-outs cost more.
- Turnaround time. Standard lead times of two to three weeks are priced normally, while urgent or expedited orders attract a premium.
Glass Sandblasting Price by Application
The same square-foot rate applies differently depending on what you are creating. Here is what to expect across the most common uses of sandblasted glass in Dubai.
| Application | Typical Project Range | Why the cost varies |
| Home or office partitions | AED 45-110 per sq ft | Thickness, framing and full vs partial frost |
| Glass doors (interior) | AED 50-130 per sq ft | Usually toughened; hardware affects fit cost |
| Shower enclosures | AED 70-150 per sq ft | Toughened glass required for safety |
| Office logos and branded signage | Project-based quote | Stencil work and design detail drive price |
| Decorative panels and facades | AED 60-160 per sq ft | Size, design and installation height |
| Furniture (table tops, shelves) | AED 40-100 per sq ft | Edge polishing and custom shapes |
For commercial fit-outs in Dubai, such as offices, retail units, clinics, and hospitality, most clients commission a mix of partitions and branded glass, so an itemised quote is the most reliable way to budget.
Supply-Only vs Supply-and-Install Pricing
You can buy sandblasted glass two ways, and the difference matters for your budget.
Supply-only means you purchase the finished, sandblasted panels and arrange your own fitting. This is the lower-cost option and suits contractors and clients with their own installation team.
Supply-and-install includes measurement, fabrication, delivery, and professional fitting. Expect to add roughly AED 15-45 per square foot for installation, depending on glass weight, mounting type, and site access. For most homeowners and businesses, supply-and-install is the safer choice, as toughened glass is heavy, and incorrect handling can crack panels or compromise safety.
Sandblasted Glass vs Frosted Film vs Acid-Etched Glass: Cost Comparison
Many buyers researching the glass sandblasting cost in Dubai also compare it with cheaper alternatives. Here is how the three main options stack up.
| Option | Typical Cost | Durability | Best for |
| Sandblasted glass | AED 35-150 per sq ft | Permanent, etched into the glass | Long-term privacy, premium finish, custom designs |
| Frosted vinyl film | AED 8-25 per sq ft | 3-7 years; can peel or bubble | Temporary or budget projects, rented spaces |
| Acid-etched glass | AED 45-160 per sq ft | Permanent, uniform smooth finish | Whole-panel even frost, fingerprint resistance |
Frosted film is the cheapest upfront, but it is a surface coating that eventually peels, scratches, or discolours, especially under UAE heat and humidity.
Sandblasting and acid etching are permanent treatments fused into the glass itself. Sandblasting wins on design flexibility (logos, patterns, gradients), while acid etching gives a smoother, more uniform frost.
For most permanent installations, sandblasted glass offers the strongest balance of cost, durability, and customisation.
How to Get an Accurate Glass Sandblasting Quote in Dubai
Online price ranges are useful for budgeting, but only a site assessment gives you a firm number. To get a reliable quote:
- Measure your openings or have them measured professionally, as quotes are based on exact square footage.
- Decide on glass type and thickness early, since this is the biggest single cost driver.
- Share your design, whether a full frost, a pattern, or a branded logo, so the supplier can price the stencil work.
- Ask for an itemised quote that separates glass, sandblasting, edge work, and installation.
- Compare two or three quotes for the same specification.
This is where choosing the right partner matters. Established glass sandblasting suppliers in dubai offer a free site visit, exact measurements, and a transparent breakdown, so you know precisely what you are paying for and avoid hidden charges later.
Is Sandblasted Glass Worth the Cost?
Sandblasted glass costs more than frosted film, but the value becomes clear over time. The etched finish is permanent, scratch-resistant, and never peels, which means no replacement or re-application costs down the line.
It delivers reliable privacy while still letting natural light flow through, ideal for Dubai homes and offices that want openness without sacrificing seclusion.
Beyond privacy and durability, sandblasted glass improves interior design by softening harsh daylight, reducing glare, and giving partitions, doors, and panels a refined, modern finish.
It also lets businesses etch logos and brand motifs directly into the glass, a premium touch that vinyl film cannot match. For a long-term installation, sandblasted glass is a sound investment rather than an expense.
Tips to Reduce Your Glass Sandblasting Cost
You can manage your budget without compromising quality:
- Combine orders. Sandblasting several panels together lowers the cost per square foot.
- Choose a simple frost where a custom design is not essential, as full or partial frosting is far cheaper than detailed artwork.
- Standard sizes save money. Irregular shapes and heavy edge machining add to the bill.
- Plan ahead. Standard lead times avoid rush charges.
- Bundle supply and installation with one specialist to reduce coordination and transport costs.
Conclusion
Understanding the glass sandblasting cost in Dubai comes down to a few clear variables: glass thickness, design complexity, project size, and whether you need installation.
As a planning guide, expect AED 35 to 150 per square foot for finished sandblasted glass, with simple frosted panels at the lower end and custom toughened work at the higher end. The most accurate figure always comes from a proper site assessment and an itemised quote.
For a precise, project-specific estimate and expert advice on glass type, design, and installation, choose Allamsah, the trusted sandblasted glass specialists serving Dubai and the wider UAE.
You can explore our full range of glass solutions, services, and completed projects on the Allamsah website.
Ready to start your project? Contact the Allamsah team today for a free site measurement and a transparent, no-obligation quote on your glass sandblasting work.
Explore Our Related Glass Services Blogs
- Sandblasted Glass vs. Acid Etched Glass: Which is Better?: Comparing Sandblasted and Acid Etched glass for style and durability.
- What Is Back Painted Glass and Its Uses?: A sleek and modern solution for walls, kitchens, and commercial interiors.
- What Is Stained Glass? History, Process and Modern Uses: Discover the timeless artistry and its role in contemporary design.
- What Is Acid Etched Glass? Benefits and Applications: An elegant choice for privacy and refined interior aesthetics.
- What Is UV Glass Printing? A Beginner’s Guide: Learn how vibrant and customized glass designs are created.